Water Heaters
18-14 AWG, Nylon, Splice Tap Connector, Utilizes Insulation Displacement, Self Stripping Contacts Which Provides Faster, Easier Tapping Than Conventional Twist Or Other Type Splices, No Special Tool Required, Permanent Lock, Self-Extinguishing, Built In Wire.
24", Plastic Polymer Water Heater Pan With 1" PVC Plastic Fitting, Will Not Rust Or Corrode, Meets SBC Requirements, Bagged.
Camco 24" x2.25" Deep Aluminum Drain Pan with PVC Fitting. It is suitable for gas or electric water heaters and will not rust, corrode or crack. It has a pre-cut side opening for drain fitting and includes 1" and 1-1/2" drain fittings.
22" ID x 2.25" Deep, Aluminum Drain Pan, With PVC Fitting, For Gas Or Electric Water Heaters, Will Not Rust, Corrode Or Crack Pre-Cut Side Opening For Drain Fitting, 1" To 1-1/2" Drain Fitting Included.
3/4" Sharkbite x 3/4" NPT, Lead Free, Water Heater Kit, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC & Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI & 200 Degrees Fahrenheit, Design Certified To ASSE1061/NSF61 Standards, Meets UPC, IPC & CUPC Requirements, Fittings Are Listed With IAPMO & Are Certified For Use On Potable & Hydronic Water Distribution, Certified For Underground Applications & As A Manufactured Joint Without The Need For Access Panels, Lead Free Compliant To Federal Law 111-380.
1/2" x 3/4", Lead Free, NPT Water Heater Kit, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC & Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI & 200 Degrees Fahrenheit, Design Certified To ASSE 1061/NSF61 Standards, Meets UPC, IPC & CUPC Requirements, Fittings Are Listed With IAPMO & Are Certified For Use On Potable & Hydronic Water Distribution, Certified For Underground Applications & As A Manufactured Joint Without The Need For Access Panels, Lead Free Compliant To Federal Law 111-380.
Universal, Water Heater Element Adapter Kit, Contains One 2-1/2" 4 Bolt Adapt A Flange, 1 Four Hole Gasket, 1 Screw In Gasket, One 4-5/16" Thermostat Bracket, Eighteen 5/5" Hex Washers & Relok, Converts Screw In Elements To Replace Round Head, Flat Or Universal Flange Elements.
2", Drain Valve, The Same Drain Valve That Comes As Original Equipment On Many Water Heaters, Will Fit All Makes, Select The Valve That Is Long Enough To Clear The Insulation Between The Jacket & The Tank.